Intelligent water hardness meter is widely used in water plant, power plant, boiler water etc. It is designed for continuous detection of hardness value in liquid.
Detailed Images
Hardness sensor （ISE）Smart probe, high-precision measurement of deionized water
Main Features:
Advanced water hardness ion-selective electrode technology (ISE) with high sensitivity, fast responsibility and stability. Easy to maintain.
Protection Grade:IP65 (waterproof, dust-proof and damp-proof).
Digital LCD display and English menu
Multi-parameters showed simultaneously :Water hardness value, temperature, output current, and alarm of range ability etc.
Recoverable factory setting.
Automatic / manual temperature compensation function.
(Optional) Communication function:with RS - 485 communication interface (MODBUS protocol compatible) .The corresponding hardness data of 4 ~ 20 mA can be set freely.
Analog output : 4~20mA
The relay lag value can be set freely to avoid frequent operation of relay.
Watchdog:make sure the meter does not go dead.
The main components imported from foreign famous brand.
Power off protection>10 years.
ABS plastic shell (waterproof, dust-proof and damp-proof).
Attention:
1. The electrode is a consumable product. after use, the diaphragm begins to show signs of aging. It must be calibrated every 1 month to ensure measurement accuracy. If the electrode has been purchased for more than 6 months, please pay attention to replace the electrode.
2. The electrode installation environment requirements are: water pressure less than 0.15MP, flow rate less than 10cm3 / s, temperature less than 35 ℃.
3. Regularly check the electrode head for dirt adhesion. If you need to clean the electrode, rinse the dirt with water as much as possible. Do not touch the diaphragm with hard objects, causing the diaphragm to break.
4. There is a white spot about 1cm above the electrode diaphragm. Make sure that the white spot is immersed in the water body, and the white spot cannot be damaged or attached with dirt, otherwise it will cause electrode damage or inaccurate measurement data.
Common Questions:
1. The warranty period of hardness tester and ion tester is 3 months.
2. The hardness tester is a soft film, which is easily affected by water flow, has poor repeatability, and the zero position is easy to convert. regular calibration is required to improve accuracy.
3. The purchased hardness tester will not be used until half a year after it is received. The measurement data is not accurate or has no value. Our hard
The warranty period of the meter and ion meter is three months. the receipt of the goods begins, and it is not used after three months. the electrode problem is not covered by the warranty.
4. The measurement data fluctuates. generally, it is caused by submerged installation and water flow attenuation pressure rotation. It is recommended to use circulation
The electrode is installed in the tank.
5. The measured value is not accurate. after receiving the hardness tester or ion meter, there is an error between the measured value and the standard solution.
In the standard solution, the instrument is energized for one day, and the standard solution is re-measured the next day, and if not allowed to re-calibrate.
6. There is an error between the hardness tester and ion meter measurement data of the water sample and the data detected by the third party. There may be other ions in the water sample.
It is recommended to use local water samples for calibration.
