Intelligent dissolved oxygen meter can be widely used in waste water,boiler feed water, environmental water dealing, pharmacy, aquaculture and tap water etc. It is designed for continuous detection of dissolved oxygen value in liquid.
Detailed Images
|
Technical Parameters
|
|
◇Measuring range: 0~200.0 ug/L ,0 ~ 20.00 mg/L (auto switch range ability) 0~60℃
|
◇Control interface:Two groups of ON/OFF relay, divided into 2 aspects of high and low for alert control.
|
|
◇Signal isolation:optical coupler protects 4~20mA signal outputting.
|
◇Automatic self-cleaning interface: a group of self-cleaning point. Clean time: 0-9999 seconds, interval time: 0-9999 minutes.
|
|
◇Relay:the relay lag value can be set freely. Relay requires 3A 220VAC
|
◇Operating conditions:environmental temperature of 0~60℃,relative humidity ≤90%
|
|
◇Accuracy :ug/L: ±1.0%FS;mg/L:±0.5%FS,±0.3℃
|
◇Resolution:0.1ug/L,0.0 1mg/L,0.1℃
|
|
◇Temperature compensation:0~60℃.
|
◇Working voltage: 220VAC10%,50/60Hz
|
|
◇Weight:0.9Kg
|
◇Dimension:96x105×156 mm
|
|
◇Hole size:92×92mm
|
◇Protection Grade:IP65 (waterproof, dust-proof and damp-proof)
|
