Product introduction
Salinity meter is an online intelligent salinity meter independently developed by our company. High performance CPU chip and SMT patch technology are used to measure salinity and temperature and to compensate temperature. It can be widely used in continuous monitoring of salinity value of pyroelectricity chemical fertilizer metallurgy environmental protection pharmaceutical biochemical food and tap water solutions.
Main features
- Large screen lattice LCD display Chinese menu operation.
- Bromine can be used to measure salinity and control upper and lower limits.
- Alarm status is displayed ON the screen and can be accompanied by ON/OFF signal output.
- Automatic temperature compensation function: 0~100℃.
- Communication unction (optional) RS-485 communication interface (MODBUS protocol partial compatibility) the corresponding salinity value of 4-20mA current output can be set arbitrarily.
- Watchdog function: make sure the meter doesn't crash.
- Restore factory Settings function. Power off protects > 10 years.
Technical indicators
- Measuring Range:0-300%.
- Resolution:0.1%.
- Accuracy:2.0%(FS).
- The automatic temperature compensation: 0 ~ 100 ℃, compensate NTC 10k, 25 ℃ as a benchmark, the coefficient of temperature are modifiable.
- Control interface: two groups of ON/OFF relay connection point. It is divided into salinity, temperature control signal photoelectric isolation output.
- Signal isolation output: photoelectric coupling isolator protect 4-20ma signal output.
- Relay: The delay figure of relay is set randomly, and the relay load is 10A 220VAC
- The working conditions: temperature: 0 ~ 60 ℃, relative humidity ≤90% .
- Load＜750Ω（4-20mA）
- Working voltage:220VAC ±10%、50/60Hz or DC24V
- size: 96×96×168mm
- Hole size: 92×92mm
- Weight:0.8KG
